See Also:
http://www.printlogger.com   Printer accounting software
http://www.sys-monitoring.com   System monitoring software
http://www.hs-lab.com   Software for Business and Home
http://win-printing.com   Windows Printing Software,
Articles and Press Release
     
Handy Software Lab's Software Products
     
HSLAB Force Down   HSLAB Print Logger Family
HSLAB Shutdown Folder   HSLAB Sys Monitor
HSLAB Logger   HSLAB Prefetch Manager
HSLAB HTTP Monitor Family   HSLAB WhoIs
HSLAB Access Control Family    
     
     

HSLAB Print Logger

ID #1063

Printing to a Network Device

1. Verify basic network connectivity.

Check user rights, protocols, share names, and so on to determine if you can see the server. Copy files to a share on the print server using File Manager in Windows NT 3.x or Windows Explorer in later versions of Windows. If you cannot access the server, you may not be able to access the printer.
2. Create a local printer and redirect the port to the network server.

Create a local printer and in the Ports section, create a new port. Click Local, and type the server and printer name for the printer (use the \\servername\printername syntax). Use this port for the local printer. This determines whether there is a problem with the copying of files from the server to the workstation that occurs when you use a Connect To Setup or click Network Printer in the Add Printer Wizard.
3. Printing from an MS-DOS-based program.

Make sure that the NET USE command has been run to map the LPT port to the network share. If it has, delete it and re-map the port. If it then works, there may be an issue with ghosted connections. A command may need to be run in the login script to remap the port each time you log on.

If it is still not printing, try typing "dir > LPT<x>" (without quotation marks) where <x> is the number of the port being mapped. If it still does not print, double-check the networking.

NOTE: Printing from MS-DOS-based programs does not work if the printer is a Postscript Printer.
4. If you are using LPR or printing to a JetDirect card using the TCP/IP protocol, try these items:
• Ping the IP address. If it fails, check the network connectivity and verify IP addresses.
• Create an LPR port to the printer and then create a local printer connected to that port. This is the recommended way to connect to a JetDirect printer. Sharing this printer on the network allows the computer to act as a print queue for the JetDirect printer.
For additional information, click the article numbers below to view the articles in the Microsoft Knowledge Base:
124735 (http://support.microsoft.com/kb/124735/EN-US/) How Windows NT LPD Server Implements LPR Control Characters
124734 (http://support.microsoft.com/kb/124734/EN-US/) Text of RFC1179 Standard for Windows NT TCP/IP Printing
5. Determine whether you can print locally.

If possible, try printing locally. This determines whether it is a network or computer-specific problem. Also see the "Program" and "Print Stack" sections of this article.

Tags: -

Related entries:

Last update: 2007-02-13 02:39
Author: Oleg
Revision: 1.0

Digg it! Share on Facebook Print this record Send FAQ to a friend Show this as PDF file
Propose a translation for Propose a translation for
Please rate this FAQ:

Average rating: 0 (0 Votes)

completely useless 1 2 3 4 5 most valuable

You cannot comment on this entry